Additive Manufacturing Services

Overview

While additive manufacturing (AM) grows at a rapid pace, there was previously no standardized way of proving to manufacturers and regulators that AM products are safe.

AM techniques give companies flexibility to design innovative products and/or reduce production lead times, but there are still significant barriers to overcome to ensure consistent quality and safety. To compound this issue, there were no global certification schemes that considered AM-produced parts.

This is why LRQA and industry partner TWI have introduced a broad-based, AM part certification service that spans multiple industries and applications, from  general manufacturing, to oil and gas upstream and downstream.

How it works

We help manufacturers of AM parts prove to their customers and the market that their parts meet the required codes, standards, controls and best practices. We apply evolving international standards on AM, setting the requirements to prove equivalence with existing manufacturing methods, codes and standards, and apply our knowledge to help develop international standards on AM.

When we work with clients to certify their AM parts, we look at not only their designs but their material choice and supplier, as well as the AM facility they'll use. We do this through our framework, https://www.lrqa.com/en-us/additive-manufacturing/resources/polymer-guidance-notes/ We can also help train personnel on the qualification and certification of AM-related facilities, materials, and components.

Overview

Existing metallic materials standards haven't yet expanded to include requirements for the additive manufacturing material form, and the required tests and acceptable tolerances for other material forms can't simply be adopted because of differences in the resulting properties. This requires tailored test plans that are carefully designed and performed to prove the suitability of the formed material.

Consistency is crucial for additive manufacturing. That begins with control and characterisation of the feedstock - powder or wire, for example. Chemical composition, particle size distribution, apparent and tap density, are just a few basic characteristics of metallic powder that need to be properly tested and controlled. This doesn't only apply when you're purchasing powder from a supplier, but any variations that may occur between batches (virgin and recycled) must be accounted for.

The storage and handling of the feedstock must also be controlled to an approved procedure, in a similar fashion to welding consumables. This is to avoid contamination, physical damage, oxidation, and ignition/explosion of the feedstock.

How it works

 We help manufacturers of AM materials prove to their customers and the market that the materials produced comply with the associated material specifications and best practices. We use our framework, https://www.lrqa.com/en-us/additive-manufacturing/resources/polymer-guidance-notes/.  We apply evolving international standards on AM and set the requirements to prove equivalence with existing manufacturing methods, codes and standards. Compliance with our certification framework enables manufacturers to issue Type 3.1 or Type 3.2 certification for the materials.

Overview

A robust control process, encompassing everything from design and manufacturing planning to raw material procurement, recycling, manufacturing, post-processing, inspection, and final acceptance, is pivotal for producing high-quality and consistent AM products. Such a process is crucial for scaled production. Without these controls in place, an AM facility may struggle to remain competitive, especially given the intensifying market competition and evolving standards and regulations.

LRQA’s AM Facility Advisory service equips both existing and new facilities with the tools and insights needed to commence production effectively. Drawing from our extensive experience in qualifying AM facilities globally and our active participation in international standards committees, we guide facilities in aligning their processes with international best practices, while also recognizing and accommodating the unique characteristics of each facility.

How it works

Our team of experts follows clearly defined phases and timelines to ensure minimum disruption to a facility’s daily operation. Depending on your unique requirements, activities may include the following:

• A Gap analysis to map out the required scope and documents for the facility. An onsite demonstration audit can be also conducted.
• Procedure development where LRQA create the procedures, work instructions, record templates, and/or inspection and test plans. At the end of the process, the AM facility receives the full set of facility documents ready to be formalised and audited against the specified standards and requirements.

Overview

Even with well-designed parts with approved materials, many things can go wrong at the production stage.  When first adopting technology, companies either set up new in-house additive manufacturing facilities, or outsource to AM service bureaus to produce their components.

In both cases, independent qualification by LRQA can prove to your clients that you have appropriate processes in place.

How it works

Using our framework, https://www.lrqa.com/en-us/additive-manufacturing/resources/polymer-notes-for-additive-manufacturing/. for metal- based AM processes and “LRQA Guidance Notes for Polymer AM Certification” for polymer-based AM processes, we fully audit printing facilities, examining the following areas:

• Personnel competence
• Control of feedstock, auxiliary materials (e.g. gases, cleaning materials) and part handling
• Installation, maintenance and ongoing capability of the AM system
• Control of manufacturing through facility procedures and manufacturing plan
  
  

LRQA has qualified AM facilities that utilize powder-bed fusion and direct energy deposition techniques.